Premium Heavy Duty 600D 12-14ft 3.6-4.2M Marine Grade Trailerable Boat Cover OB

• Water Repellent and Breathable Fabric
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• "Snug-Fit" Reinforced Sewn-in Elastic Cord
• Double Stitched Interlock seams with "Rot-proof" thread
• Protect fittings such as seats, trim, electronics and other exterior and interior accessories
• Suitable for most fiberglass and aluminum V-hull Open Fishing Boats with NO WINDSCREEN
• Trailerable
• Quick Release buckles with adjustable heavy-duty straps
• Free storage bag included
• Size: Model T1AA 12-14ft (3.6-4.2m) with 72" (1.83m) Beam

This Universal fit boat cover is made from 8.1oz/600d/ 600 denier marine grade polyester.

600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.

The fabric we use is coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.

The material of this cover is heavy duty enough to support towing speed up to 100km/h. This particular unit will fit a V-hull Fishing Boat that is between 12 and 14 ft long, with a maximum beam of 72".

How to measure your boat for a boat cover

1. Measure your boat's centerline length (straight measurement from bow to stern).
    
2.  
3. Measure your boat's beam (the flat width of the boat at its widest point usually near mid-ship).

The actual length of this cover is 4.5m and its actual width is 2.3m.

Please note that this does not take into consideration of any bow or hand rails on the boat. You may need a bigger size cover to accommodate them. This particular cover does not fit boat with windscreen.

Also, this cover is for Fishing Boat with V-Hull nose. If you have wide front / nose fishing boat like the one in the picture below, please consider our new design wide nose fishing boat cover.